Alphacool Announces GPX-Pro & NexXxos GPX Cooler from Eiswolf

With Eiswolf GPX-Pro ATI RX Vega and NexXxoS GPX cooling - ATI RX Vega, Alphacool has the perfect cooling solution to start the next generation of AMD Vega graphics cards.

NexXxoS GPX Vega Version now offers an enhanced backplate with a side shield to cover the PCB. It also improves its cooling performance, since heat is distributed more evenly over the front connections. If you are using a graphics card with NexXxoS GPX cooler and want to switch to AMD Vega, you will be happy to hear about the appropriate upgrade tool for your cooler.

The Eiswolf GPX-Pro will still be an AIO solution, and will still come with an integrated pump built around new "backflow" technology for whisper operation. Pure copper radiators from the renowned 120mm NexXxoS series and 45mm thickness deliver exceptional cooling performance.
For a larger solution, an alternative ST30 version has been created - "The Eiswolf GPX-Pro 240mm".

Of course, GPX-Pro Eiswolf will also be available in a fully loaded version of Eisbaer Ready, which can be integrated into any cooling circle. You can install it with a pre-assembled quick connector, or use a standard G1 / 4 connector "at any connection point.

Alphacool Eiswolf 120 GPX Pro ATI RX Vega M01

With the Alphacool Eiswolf, we offer an extremely quiet high-performance cooler for every current graphics card on the market. A closed water cooling system which is easy to install and can be extended and extended by a quick-release closure.

Alphacool Announces GPX-Pro & NexXxos GPX Cooler from Eiswolf

Alphacool uses an entirely new design for the pump to minimize pump noise and improve its performance. The suction pump is born. The principle of sucking creates a bit of turbulence in the water for more currents. This makes the pump almost inaudible. A new thing in the AiO market.

The cooler comes naturally with a backplate, which is connected directly to the coolant after assembly and thus ensures better heat transfer and distribution. This significantly improves cooling performance. In addition, this also improves the look, since the PCB of the graphics card is virtually invisible from the side. Only openings for electrical connections and SLI / CrossFire connectors remain free. Cooling is also modular. If you buy a new graphics card no longer need to buy a complete cooler. Only aluminum parts should be replaced. Alphacool offers a special upgrade kit. This will reduce your costs for the next upgrade. This is also unique in the AIO segment.

Hoses and connections are also based on classical water cooling components. The hose is covered with anti-kink springs and has a size of 11/8 mm. Connections are based on classic G1 / 4 "threads and are therefore easily exchanged for other models or sizes if desired.

With two quick discharge locks, the cooler can be easily integrated into each cooling circuit. If you use AAC Alphacool Eisbaer CPU cooler, you can combine it with GPJ-Pro Eiswolf via the quick release tool. With Eisbaer they also have an excessive system because they then have two pumps on the circuit. If one has to fail, the second pump is able to maintain the cooling circuit. This is security at the highest level.

Alphacool NexXxos GPX - ATI RX Vega M01

With the new NexXxoS GPX cooler, Alphacool is one step ahead! Optimal performance and quality in this new cooling concept with little money!

GPU is actively cooled by newly discovered injection technology. All other chips are sufficiently cooled by passive cooling, where the water cooler for the GPU is closed.

The patented cross slot technology for Alphacool NexXxoS XP in 2004 has been further developed. The fin and channel structure has been refined. The remaining tines are 0.5 x 0.5mm and 2.5mm tall. This allows very large and rapid heat transfer from copper to the cooling medium.

Due to inlet outlet and outlet, this cooler can also be used without any strenuous effort in SLI operation. Up to four graphics cards can also be connected to Alphacool GPX SLI Connector.

The scope of delivery now includes a backplate, which again cools the graphics card with a small passive cooling rib, giving a nice impression on the graphics card and at the same time protects.

Passive cooling is done by using a very suitable cooling rib, nearly 18mm, that covers the entire graphics card. Thanks to the light air circulation in the housing, this cooler does not fit the conventional cooler.


Delivered by FeedBurner